產品特性

Product features

● 利用工廠壓縮空氣驅動增壓泵浦，輸出油壓力，作為油缸之動力源，流量大于一般油壓增壓器，可連續式增壓，作動缸無增壓行程之限制。

Using compressed air from the factory to drive the booster pump, the output oil pressure is used as the power source for the oil cylinder. The flow rate is greater than that of a typical hydraulic booster, and it can be continuously pressurized. The actuator cylinder has no limit on the boosting stroke.

● 以空氣調壓閥調整輸出油壓壓力，達到增壓倍數即停止驅動，油壓下降時、泵浦將會(huì )自動補償，特別適用于小流量液壓夾具工裝或其它長時間油壓夾持機構。即節省能源，不產生油溫、經濟方便。

Adjust the output oil pressure with an air pressure regulating valve, and stop driving when the pressure increases. When the oil pressure drops, the pump will automatically compensate. This is especially suitable for small flow hydraulic fixtures or other long-term hydraulic clamping mechanisms. It saves energy, does not generate oil temperature, and is economically convenient.

● 采用進口高性能氣動換向閥，保證氣動泵長效壽命、穩定工作。

We use imported high-performance pneumatic directional valves to ensure the long-term service life and stable operation of the pneumatic pump.

● 采用嘉剛定制化專用氣動泵密封組件，配合公司多年氣油壓缸工藝，保證氣缸長久工作不漏氣、穩定運行。

Adopting Jiagang customized specialized pneumatic pump sealing components, combined with the company's many years of advanced technology in pneumatic and hydraulic cylinders, to ensure that the cylinders work for a long time without air leakage and stable operation.

● 高壓油輸側采用日本NOK密封件，保證輸出壓力穩定可靠。

The high-pressure oil transmission side adopts Japanese NOK seals to ensure stable and reliable output pressure.

產品優勢介紹

Introduction to product advantages

1、占地面積小

1. Small footprint

常規7MPa、16L/min液壓泵站油箱容積一般大部分為60升或40升、少部分小可做到20升。采用氣動增壓泵油箱容積小可以做到5升。

The volume of the oil tank in a conventional 7MPa, 16L/min hydraulic pump station is generally 60 liters or 40 liters, and a small portion can reach up to 20 liters. The use of a pneumatic booster pump can achieve a small oil tank volume of up to 5 liters.

2、維護成本低

2. Low maintenance costs

液壓油一般為一年需更換一次，假設以40升常規泵站相比較每臺泵站一年節省35升液壓油，市售每升液壓油14元，每臺機每年節省35x15=490元。

Hydraulic oil generally needs to be replaced once a year. Assuming that compared to a 40 liter conventional pump station, each pump station saves 35 liters of hydraulic oil per year. The commercially available hydraulic oil costs 14 yuan per liter, and each machine saves 35x15=490 yuan per year.

3、節省能源

3. Energy saving

● 舉例假設一個產品加工周期，油缸夾緊時間5秒、加工時間60秒，上料時間15秒。機床每天工作16小時。扣除上料及加工時間，氣動泵每天耗氣合計用時1小時

For example, suppose a product processing cycle, with a clamping time of 5 seconds for the oil cylinder, a processing time of 60 seconds, and a loading time of 15 seconds. The machine tool works 16 hours a day. After deducting the loading and processing time, the total daily gas consumption of the pneumatic pump is 1 hour

以16倍氣動泵為例，連續工作每小時耗氣量約3.36立方。（一臺22kw的空壓機一般就是3-3.5m?/min的排氣量）。空壓機工作一分鐘可滿足氣動泵用氣量，由此可見氣動泵每天耗氣用電量小于1元。

Taking a 16 times pneumatic pump as an example, the continuous operation consumes approximately 3.36 cubic meters of air per hour. A 22kw air compressor usually has a displacement of 3-3.5m/min. One minute of operation of the air compressor can meet the daily gas consumption of the pneumatic pump, indicating that the daily gas and electricity consumption of the pneumatic pump is less than 1 yuan.

● 常規7MPa、16L/min液壓電動泵站、假設按1.5KW電機計算，每天工作16小時，每天耗電量為24度電。

A conventional 7MPa, 16L/min hydraulic electric pump station, assuming a 1.5KW motor calculation, operates for 16 hours per day and consumes 24 kWh of electricity per day.

● 由此可見改用氣動增壓泵站每臺機每天可節省23度電，工業用電每度1元計算。每月按30天計算，每臺機每月可節省690元電費。

From this, it can be seen that switching to a pneumatic booster pump station can save 23 kilowatt hours of electricity per day, with industrial electricity calculated at 1 yuan per kilowatt hour. Calculated on a monthly basis of 30 days, each machine can save 690 yuan in electricity bills per month.

4、低溫升

4. Low temperature rise

氣動泵站在油缸夾緊工件后自動保持壓力恒定，無溢流損失，因此系統無溫升。由于液壓系統低溫升、油缸密封件壽命大幅提高、液壓油更換周期也可延長

The pneumatic pump station automatically maintains a constant pressure after clamping the workpiece in the oil cylinder, without any overflow loss, so the system has no temperature rise. Due to the low temperature rise of the hydraulic system, the service life of cylinder seals has been significantly improved, and the hydraulic oil replacement cycle can also be extended

5、與機床連機方便

5. Convenient connection with machine tools

無需與機床連接任何電源，即可與機床夾具輸出高壓液壓油。泵站采用手動液壓換向閥，或氣控式液壓換向閥。

No power supply needs to be connected to the machine tool to output high-pressure hydraulic oil to the machine tool fixture. The pump station adopts manual hydraulic directional valves or pneumatic hydraulic directional valves.

6、與同類產品相比噪間更低

6. Lower noise margin compared to similar products

與其他主流日資同類產品相比我公司產品工作噪音只有75分貝。例如 某 P牌氣動泵工作噪音78分貝，某K牌氣動泵工作噪音82~85分貝。

Compared with similar products from other mainstream Japanese brands, the working noise of our company's products is only 75 decibels. For example, the working noise of a certain P brand pneumatic pump is 78 decibels, and the working noise of a certain K brand pneumatic pump is 82-85 decibels.

7、注意事項

7. Precautions

與常規電動液壓站相比油泵輸出流量較小。

Compared with conventional electric hydraulic stations, the output flow of the oil pump is smaller.

本文由氣體增壓泵友情奉獻.更多有關的知識請點擊:http://www.liqun518.com真誠的態度.為您提供為的服務.更多有關的知識我們將會(huì )陸續向大家奉獻.敬請期待

This article is a friendly contribution from the gas booster pump. For more related knowledge, please click: http://www.liqun518.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned